UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect

Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).

This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!

How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.

Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.

A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.

I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.

An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.

A wearable device that can conduct ECG on the go and show it on mobile and is available at cheap cost.

Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.

Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.

This exoskeleton was designed to help a patient suffering from paralysis to rehabilitate faster.

Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.

Just a normal mouse which will give you true feeling of gun firing in games.

A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!

This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.

This reminds people to keep a 2-meter distance from you

A smart glove which converts sign language into Alexa commands. Can also be used for speech.

This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result

Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!

Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.

This health kit helps to get continuously the data about quality and overall duration of the sleep and to determine the sleeping phases.

Low cost and noninvasive medical patch that continuously monitors temperature and sends alerts to phone when temperature reaches set limit.

A device that prevents caretakers from leaving loved ones in unattended vehicles, which can possibly be unsafe due to the environment.