Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.

A digital baumanometer built using an Arduino Uno board, where the data is analyzed with a slope method in Python.

Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.

Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.

I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.

Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.

An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.

A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.

A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!

Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.

This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.

This exoskeleton was designed to help a patient suffering from paralysis to rehabilitate faster.

Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!

This health kit helps to get continuously the data about quality and overall duration of the sleep and to determine the sleeping phases.

I created an electrocardiogram using TouchDesigner. The image moves according to the value of the sensor connected Arduino.

A device that prevents caretakers from leaving loved ones in unattended vehicles, which can possibly be unsafe due to the environment.

A smart glove which converts sign language into Alexa commands. Can also be used for speech.

Gather data and develop algorithm to distinguish walking and running.

A modified electric wheel chair controlled by the leap motion providing unparalleled control over the wheelchair and household appliances.

Embroidering a freaking laaaaaaseeeerrrrr into clothing ~ Perfect for the holiday season! And it's so bright that it's visible in day light.

Low cost and noninvasive medical patch that continuously monitors temperature and sends alerts to phone when temperature reaches set limit.

Getting some information from human body by using simple sensors and Arduino.

It's an eTextile patch for hover, touch, and pressure input, using both resistive and capacitive sensing.

E-health Prototype System for Cardiac Telemonitoring "Caring your heart anywhere"