An easily constructed USB-powered pulse oximeter device that can be built for around $25 and features an OLED display.
Project tutorial by Arduino “having11” Guy
This health band can assist old people in their daily lives, leaving the family stress free!
Project tutorial by Technovation
3-channel EMG allows to control individual fingers with very little delay.
Project tutorial by Dmitry Dziuba
A rather convenient device to monitor heart rate while running.
LED ring that blinks to your heart beats and displays current BPM both by number and color of illuminated LEDs.
A dress with my painting of flowers on the fabric; fireflies in the flowers blink according to wearer's heart-rate.
Project tutorial by Kitty Yeung
How to make a portable thermometer sensor MLX90614 with an Android device as display.
Project tutorial by SekolahRobot
The Haptic Proximity Module (HPM) enables people with low vision, or other vision impairments, to engage with their direct surroundings.
Project tutorial by Imran Shamsul
A wearable badge that warns users if they encroach another user's safe social distance. Low cost and no infrastructure required to operate.
Project tutorial by filipmu
This simple project want help people and institution in this Emergency. A pulse oximeter for fast reaction to the Covid-19.
Project tutorial by cerebrum_2020
A portable small device to verify anywhere the UV index in the sun rays.
Project tutorial by fmarzocca
AutoSteri is a small and compact automatic UV sterilization system that uses a PIR to detect a human and cleans when they leave.
Project tutorial by David Bershadsky
This tool signals optically and acoustically in several stages when the minimum safety distance is undershot.
Project tutorial by DL1EKM
A small, inexpensive iontophoresis device designed with convenience in mind.
Project tutorial by Cameron Coward
Simple yet Effective way to Fight COVID-19 with Hand Wash and Hand Santization, without touching the Bottle!
Project tutorial by Mission Critical
Experimental studies would assert the possibility that PM10 may act as a “carrier” for the spreading of the viral infection of COVID-19.
Project tutorial by Mario Soranno
It is a rechargeable waterproof lap counter that does not use a water proof bag separately.
Project tutorial by Oscar Seo
Control the streaming of Netflix using an Arduino Nano and exercise bike.
Project tutorial by Roboro
Every 10 minutes it checks my position and if it detects that I am sitting for thirty minutes, it activates an alarm.
Project tutorial by ardutronic
Slip Stream is a wearable/garment which enhances thermal comfort by circulating temperature controlled water through channels.
Project tutorial by Team TheTinkerers
A hardware timer to support your gym workout, and can influence you to complete the exercises in predefined time period.
Project tutorial by Pramod C Wickramasinghe
Three seashells as an Arduino based timer to measure the 20 seconds, which is recommended if you want to erase all traces of viruses.
Project tutorial by remnis
An automatic alerting device that prevents from getting infected from COVID-19 by touching a surface with virus present in it.
Project tutorial by Sheshank Kindalkar
An ultrasonic sensor activated Automatic Soap Dispenser. Uses a LED to prompt 20 sec hand washing. Design compatible with common soap pumps.
Project tutorial by Athanasios Dimopoulos
Or connect with your social account:
New here? Create an account