A smart glove which converts sign language into Alexa commands. Can also be used for speech.

Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.

Using AI to detect dangerous bacteria and harmful particles in the water.

A modified electric wheel chair controlled by the leap motion providing unparalleled control over the wheelchair and household appliances.

Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.

I have used a heartbeat sensor module which senses the heartbeat upon putting a finger on the sensor.

Make an Internet Radio with the mdp music player.

A photoresistor can sense the subtle changes in light intensity caused by your blood to detect your heartbeat!

An assistive technology for individuals affected by nervous system disorders like Parkinson's and Alzheimer's.

It's an eTextile patch for hover, touch, and pressure input, using both resistive and capacitive sensing.

A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.

This project displays the heart rate at the unit of beats per minute over the Internet so that it can be monitored from anywhere.

I created an electrocardiogram using TouchDesigner. The image moves according to the value of the sensor connected Arduino.

Baby monitor that can also help put your baby back to sleep.

Adding real-time feedback to a CPR manikin. Allows for depth, rate, time and chest recoil monitoring.

Getting some information from human body by using simple sensors and Arduino.

Get your heart rate, not just an IR sensor reading.

E-health Prototype System for Cardiac Telemonitoring "Caring your heart anywhere"

Gather data and develop algorithm to distinguish walking and running.

How to measure heart rate with an Arduino.

A wireless headset which allows you to control devices through cerebral waves. It works with two sensors and a Bluetooth shield.

Hook up your Arduino to take a look at your ECG, respiration and heart rate using TI's amazing ADS1292R chip.

Add Arduino and a Force Resistor Sensor to your next healthcare simulation project to detect the amount of pressure applied on a site!

Shows you how you can connect ProtoCentral's MAX30100 breakout board to an Arduino for PulseOx and heart rate measurement and visualization.