A wearable device that can conduct ECG on the go and show it on mobile and is available at cheap cost.
Project tutorial by Rushil Saraswat
Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.
Project tutorial by SurtrTech
This is a anti face touch alarm cap that doesnt allows to touch your face.. this is a trainer cap to not to touch our face!!!
Project tutorial by Dynamic Innovator
This project is about a alarm turn on while the distance between two people is smaller than 1.5 meter the minimum recommended for population
Project tutorial by ELÉTRICA SIMULAÇÕES
Just a normal mouse which will give you true feeling of gun firing in games.
Project tutorial by Teenenggr
How to make an oximeter sensor to measure heartbeat and oxygen saturation in blood, using a few components that any maker already has.
Project tutorial by Giulio Pons
Record your exertions on the Borg scale.
Project tutorial by glennedi
Almost no wiring!
Beep Beep Beeeep, you can collapse now!
This reminds people to keep a 2-meter distance from you
Project tutorial by arcaegecengiz
A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.
Project tutorial by Yeshvanth Muniraj
A small COVID medical kit that measures SPO2, Heart Rate and ECG. ECG readings are analyzed and shared via Matlab on to ThingSpeak.
Project tutorial by Ninety99
Hi, my name is Rohan Barnwal and in this project I have taught you that how you can build a device which help you to maintain social distanc
Project tutorial by Rohan Barnwal
This project is used to measure temperature by Infrared thermometer automatically and inform result by speaker. It also comment your result
Project tutorial by engineer2you
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Project tutorial by Team HRMS
Make a heart beat sensor with only an infrared emitter and a receiver, Arduino and see the real time plot of your heart beat.
Project tutorial by yashastronomy
The smart tunnel prevents further outspread of COVID-19 / SARS-CoV-2. It can disinfect a person fully in a time span of just 15 seconds.
Project tutorial by Yash Nayak
My 1st Robot.
Project tutorial by Walley Erfan Khan
UV-C / heat, Arduino-controlled, face-mask disinfecting device for Coronavirus (SARS-CoV-2). #COVID19DetectProtect
Project tutorial by NeedLab
UV sterilization lamp based Helmet sterilization box is presented in this project.
Project tutorial by Team RoboticsBangladesh
How to Make Blood Oxygen & Body Temperature Measurement with MAX30102 Pulse Oximeter using Arduino
Project tutorial by DKARDU
I made an Arduino library allowing simple communication with uECG device using nRF24 module - minimal example takes just a few lines.
Project tutorial by Dmitry Dziuba
Prevent back pain by detecting bad posture and correct it immediately!
Project tutorial by Gini76
Simple Feature-rich Smart Contactless thermometer using Arduino and MLX90615. Can Take pictures and share scan data as Excel file
Project tutorial by Aswinth Raj Balasubramani
Or connect with your social account:
New here? Create an account