With the help of Firmata, the Arduino or Particle devices control from the PC.
by Ingo Lohs
Serial communication between the Pycom LoPy and the Arduino Uno.
by Rob Braggaar
Create the perfect mood in your room, wake-up easily, light up your room as you enter or be alerted when someone enters your private space.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
A useful and easy way to control AC Lamp using a motion sensor and Arduino board.
by Mohannad Rawashdeh
Use voice to make it go forward, back, left and right. The arm can move up, down, left, right. Also, the height of the arm can be altered.
by Sagar pawar
An open source interpreter and programming language designed to run on Arduino.
by Alessio Villa
In this project, I am going to demonstrate how to use a potentiometer to dim LEDs.
by 3 developers
Use a USB serial connection and our Desktop App to control the LittleArm Arduino robot arm.
by Slant Concepts
Queue management system no paper.
Tomomi Imura, developer evangelist at PubNub, walks through setting up a Arduino simple circuit to blink a LED on-command using Johhny-Five.
Arduino ASCII Driver (library) for 3641 (four 7-segments) driven by 595 shift registers.
by Team SoSimple
In this project, I am going to demonstrate how to make different patterns on a LED ring with the help of the idIoTware shield.
by Ravi Parmar and Rupin Chheda
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
This Arduino Solenoid Tutorial shows how to control a solenoid using pushbuttons and a relay with your Arduino compatible controller.
Turn any Arduino compatible board into an IoT device with the Octoblu Johnny-Five Connector. Visually program with hardware on the web.
by Moheeb Zara
Control a PC with a gesture sensor, associating a key or a mouse click to each gesture.
by Mohamed Fadiga
Sense and control your Arduino Ethernet from Ubidots,
Enjoy teaching your kids basic electronics and as a reward get them a unique Toy.
Thanks to Ionic framework we will send custom commands to an Arduino using a BLE device to light LED.
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
The ATmega8U2 chip on your Arduino board acts as a bridge between the computer's USB port and the main processor's serial port.
Using the humble nrf24L01+ modules as BLE beacons to send and receive BLE advertisements .
by Pranav Gulati
Directions on how to setup your DIYmall GPRS/GPS SIM908 Module so that you can issue AT commands from your computer.
Or connect with your social account:
New here? Create an account