Use your android smartphone to open and close your garage door reliably (Under Development)
Project in progress by David Smerkous
This rocket engine was designed with the priority to go to space!!!!
Project in progress by UniverseRobotics
An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
Project in progress by Javi D'Ambra
This device uses 4 servo-driven wheels to slide forwards, backwards, left, right, and turn. Currently under serial or Bluetooth control.
Project in progress by Jeremy S. Cook
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
A simple automatic station to feed your pet when you are on vacation.
Project in progress by Paulo Soares
A retro digital clock with count up timer feature and automatic dimming to match ambient light conditions.
Project in progress by randtekk
Let's Test Hc-12 Bluetooth module that have 1.8 km range.
Project in progress by KureBas Robotics
Multichamber real-time imaging device for cell cultures under different conditions. For: Isthmus Engineering Award, Best Project Award.
Project in progress by 3 developers
A conversation piece with one meter of WS2812b, a $10 clock from a dollar shop, a spare 10mm LED, Arduino Pro Mini, RTC 1307 and hot glue.
Project in progress by JaeKar99
Kayaking GPS: speed, time, latitude, longitude, distance and azimuth to waypoints, odometer, tide clock, battery monitoring.
Project in progress by Chrisroy
The Otto builder community requested, and here we are developing the best printed circuit board for Otto or any biped robot.
Project in progress by Team Otto PCB
Time on the edge.
Project in progress by ekaggrat
This system can do a number of things for your rocket!
Incubator that can be fabricated in a typical makerspace at a low cost while achieving the same performance as commercial units.
Project in progress by Biomaker Challenge 2017: Team 41
A critical display that alerts you whether or not your WiFi is on. And some other less important functions as well, I guess.
Project in progress by Scott Clandinin
One code goes in, another comes out... A different way of having a single remote without needing a universal one.
Project in progress by Team Trouble
A tech high-school student-teacher team from Uruguay developing High Altitude Balloons for science! IN ACTIVE DEVELOPMENT!
Project in progress by Team Club AeroEspacial de la Escuela Tecnica de Melo
It is about the warning box that people who boarded on elevator despite the non-disabled.
Project in progress by 5 developers
This project consists of a set of proximity sensors with a haptic interface to alert the user to the presence of objects around them.
Project in progress by JpTincopa
The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!
Shows to visually impaired or ignoring the resistors colour code or lazy techs, either the exact value or value in E12 or E24 series
Project in progress by rafu
Or connect with your social account:
New here? Create an account