My project is about how to make a smart home with IoT.
In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.
by Aritro Mukherjee
Manage the time a device remains activated (lights on) when no presence is detected.
Attiny85/84 is very small and powerful chip from Atmel. In this tutorial we can add Bluetooth capabilities to this micro controller.
by Robin Kanattu Thomas
How to temperature compensate the Atlas salinity sensor automatically.
by Atlas Scientific
Real-time pH and salinity monitoring with LED indicators.
A system to maintain the pH level of a sample within a defined range.
Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it.
by Mayoogh Girish
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
In first part, we will show DHT22 sensor's data on the OLED. In the second part, we will display iPhone, Samsung and LG's logos on OLED.
by Muhammad Aqib
This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.
by Wimpie van den Berg
A simple method to notify a problem is to use email, It’s very usefully and simple to share, so I created a library to do it.
Build a simple 3-axis joystick!
by Jen Fox and Hacking STEM
This projects detects knock using Arduino UNO and sends notification to Windows 10, Ubuntu.
by Random Science Stuff
What you need to control the motors of your robot? H-Bridge is the magic word!
Blog for my Arduino, ESP and Raspberry Pi projects.
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
This project is an automatic milk feeder for when it's finally born.
by amar axr
Who isn't fascinated with shift registers and blinking LEDs? Using the 74HC595 I'll show you how to control 24 LEDs with three pins.
by David A Riewe
With a few code tweaks you can use an UNO and the serial plotter tool like an oscilloscope to examine the power used by another project.
Embedis is a library for creating simple embedded key-value servers using non-volatile storage like NVSRAM, FRAM, FLASH, or EEPROM.
by Team thingSoC
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
Works on all resin.io supported devices (beagle bone, all rpi etc) and all Arduino boards.
by Craig Mulligan
Or connect with your social account:
New here? Create an account