Arduino TEA5767 radio with analog meters for showing frequency and signal strength.
Project tutorial by Mirko Pavleski
Can light wake you up in the morning?
Project tutorial by Jiří Praus
Relive your childhood memories with the new and better Tetris!
Project showcase by Archiev Kumar
Senses for smoke in the air near a 3D printer and will sound an alarm and turn off power to the printer if smoke is detected.
Project tutorial by Miles Nash
A cube with all the necessary sensors, suitable for a wide range of applications like agriculture. Know the land beneath you!
Project in progress by Dhairya Parikh
Meet Walbi, a 2:1 scale humanoid with Arduino programs for motion capture and playback. Move it by hand, record and then play it back.
Project tutorial by Team The Inner Geek
Build a simple NeoPixel matrix with these simple steps!
Project tutorial by Arduino “having11” Guy
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Kavyashree P
Control your Commodore C-64, reset C64, select Kernal, BASIC and Charset ROM, SD2IEC device#, info display.
Project tutorial by Oe7Twj
A desktop interactive 3D-printed Arduino social robotics kit for fun and STEM education.
Project showcase by Slant Concepts
Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!
Project tutorial by Boian Mitov
A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
Build a 3D printed Lunar Phase Clock for your desk or nightstand.
Project tutorial by G4lile0
Cheapest and easiest Nixie clock in the world, the ONE TUBE™. Open source is the way. ( or use, UNO-Pro Mini/Micro-ESP )
Project tutorial by WannaDuino
This is my homemade CNC machine using Arduino, Easydrivers and old CD-Rom(s). I use Grbl and G-Code sender to execute the G-Code.
Project tutorial by Manan Thareja
eDOT is an Arduino based precision clock and weather station with built in IR remote receiver and automatic brightness adjustment.
Project tutorial by antiElectron
Arduino Nano and Visuino: Plot BME280 Temperature, Humidity and Pressure on Nextion Display Scope - Quick and Easy
Have you ever wanted to be able to control a car with your hand? Introducing the Motion Mobile!
Project tutorial by mcharrison500
This LED Display Module can works with two-color LED matrix in two sizes (large and small), as well a 7 segments x 4 digits.
Ultra low-cost flow-through photometer for on-line measurements of bacterial density.
by Alex Kutschera
In this project, you can measure typically up to 48V. It is recommended to use Arduino digital voltmeter as “0-48V DVM”.
Project showcase by KumarB
A fun pocket-sized travel game for any age. Try your luck and make the light stop on the green LED.
A miniature gaming console that lets you play snake using only an ATtiny85 and a simple I2C OLED display.
Showcasing our spot welder, which is controlled by an Arduino Nano.
Project tutorial by Michael Marinis and PCBWay
Or connect with your social account:
New here? Create an account