Writing only Arduino code, it is easy to set up control over experiments and display results on your PC's panel application.

Smart bed system which controls light, temperature, and bed gradient using voice recognition.

è un automazione di un braccio pneumatico in grado di smistare il legno da ferro

The purpose of this project is to create a radio map of the disaster area using reception devices placed near the affected area.

Detect the presence of alcohol with Arduino.

If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.

Record and play back a few seconds of input stored in EEPROM.

Smart kickboxing pad is for training speed, accuracy, and timing for beginners or expert martial arts, fitness or fun lovers.

Temperature and humidity control to achieve the ideal confort conditions. The system work in a automatic way without a manual control.

A board with 160 moving cocktail parasols.

Multifunctional network device for autonomous activity in the city environment. Its main function is communication through Wi-Fi networks.

If you do not struggle solving 'Towers of Hanoi' just build your own Arduino-powered 3-axis-robot.

The ESP8266 is great for connecting your Arduino to the internet - these instructions aim to get you online as simple and fast as possible.

How to interface a 220V load with the Arduino in safety mode.

Three antennas diversity video receiver for FPV users with tracking pan/tilt system.

Make a simple oscilloscope with Arduino MEGA 2560 and Processing

The PTHAT has been designed primarily to fit and work with the Raspberry Pi, it can also be used with other MCUs such as the Arduino boards.

How to build a simple and accurate thermometer using an active temperature sensor (MCP9071/A).

How build a simple thermometer using a silicon diode

μcuREST is a C++11 library for implementing REST services on constrained platforms, such as bare metal applications on low-end MCUs.

Get into the fantastic world of effects by making a simple design that can move with your hand by using a phone & other simple components.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.

Now after connecting all the hardware to the respective pins we start integrating the software for getting MPU readings.

Code and explanation for getting directional and motion data from the raw sensor outputs.