For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.

A simple Arduino clock without RTC module for beginners.

A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.

This device detects the presence of your hand and automatically release a specific amount of Hand-wash / Sanitizer to your hand.

Protect your flying machine!

This is a project of Radio Receiver LW/MW/SW Stereo FM with RDS, using Arduino Nano, Si473x Radio IC and 1.8in TFT color display ST7735.

Calculates the position of the sun relative to the trackers position on the earth and points the array at the sun.

8Bit Digital Delay / LO-FI Bitcrusher / Reverse Speech DSP Pedal Effects for Guitar, Voice, Synths, etc.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

Simple device to control and initialize DALI lamps.

An Arduino Uno autopilot drone with multiple sensors and a wireless camera controlled by two microcontrollers.

Make this robot moves by just moving your hand!

VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.

ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.

Antwerp is the testbed for a robotic control software framework I'm marketing named The Robby Framework

It is a NFC enable gift box that requires activation of 12 constellations to open it.

A difficult code with a try to display waveform on a small screen with precisions. Volts-time, frequency, duty cycle and divisions.

An update of the older version of the keyboard. Now it doesn't require switches on your breadboard, you can use your pc keyboard.

Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.

How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.

Our mission is to make safe drilling available for everyone.

A new customizable TVC mount that can stabilize your model rocket!

Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.

The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.