Ever asked how to control any device from any place in the world? In this tutorial, we'll learn how to control things wirelessly over WiFi.
Project tutorial by Ahmed Ibrahim Ahmed
Hot water tank's pump must be stopped if its temperature is greater than the burner's. Monitors are placed in shared places.
Project tutorial by MINAS KALARAKIS
Controlling power to the system using alarms based on voltages!
Project tutorial by T3ch Flicks
A cheap DIY air quality monitoring device.
Project tutorial by Mirko Pavleski
AKA how to build your own laboratory vortexer without spending a lot of money.
Project tutorial by Federico Vivaldi
Today I will show you how to make your ultrasonic levitator using an Arduino Nano.
Project tutorial by PMGOHARIAN
Small size code and simple hardware.
Project tutorial by M.V.P.
An easy to build and use stereo RDS FM receiver with RDA5807.
Use a DHT22 sensor with Arduino to acquire room relative humidity, temperature, humidex. Show values on display. Log data with MATLAB.
Project tutorial by dancili
Make your own mini oscilloscope at home. It’s simple and easy to do!
Turn your bedside lamp into a wake light with this cool device.
Project tutorial by wolfidan
Make the simplest ISD1700 programmer using Arduino.
Project tutorial by tsar_
A hardware timer to support your gym workout, and can influence you to complete the exercises in predefined time period.
Project tutorial by Pramod C Wickramasinghe
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Project tutorial by Shaeroden
An interesting way to increase sensitivity and reduce the noise of the ADXL335 analog accelerometer.
Cool little project and toy.
Project tutorial by eEdizon
Till the completion of Cute Drawing Buddy V1, SCARA Robot - Arduino I plan for a another drawing bot, main aim is to cover a large space.
Project tutorial by jegatheesan
Word clock with linear display of seconds includes modes for digital clock, analogue clock, temperature and humidity, plus three games.
Project tutorial by oliverb
Using 2 ATmega328s, this clock displays and decodes the DCF77 signal using 150 LEDs and 4x 7-segment display modules on a 12" (305mm) dial.
An addictive Arduino game on a 128x64 OLED display.
View images and RGB video play on SPI TFT display using Arduino Nano.
Project tutorial by Alf81010
3-channel EMG allows to control individual fingers with very little delay.
Project tutorial by Dmitry Dziuba
How to use a GY86 (wave measurements) and water temperature sensor.
A small device that will help you sorting resistors without wasting time with their color code.
Or connect with your social account:
New here? Create an account