Using websockets on one Arduino MKR1000 connected to wifi, I send temp & humidity data to a chart setup on HighCharts.

Use to record somebody's blow strength. Since without calibration it is relative value.

UV sterilization lamp based contactless Helmet sterilization box is presented in this project.

An automatic temperature scanning gate is presented to verify the body temperature of any intruder.

Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent

Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.

A Remote Patient Monitoring System that gives health workers remote access to patient's vitals without physical contact with patients.

Let's consider creating a system for tracking goods in a warehouse using a barcode scanner. We use the Arduino MKR 1000 as the controller.

Fancy to see your's vehicle data online in real-time? If so, continue reading!

Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!

An automated sanitizing system for shoes is presented throughout this project. Shoe sanitizer is used to disinfect shoes.

Employee access to the enterprise using RFID tags and employee temp measurement using a contactless thermometer that sends data to the cloud

Keep track of how much time you spend sitting (or standing) on your standing desk during the course of a day with this IoT project.

Ten-year old nephews are particularly impressed when they can change the colour of the outdoor Christmas lights from a tablet.

Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.

Control your media player using simple hand gestures. No complex circuit. Works on all computers.

Let your legacy mailbox send you SMS notifications, thanks to IFTTT.

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

Simple weather station with WiFi forecast and measuring of temperature, humidity, air pressure via MKR ENV shield.

How to make a good-looking touchscreen thermostat with optional Modbus support via RS485 with ArduiTouch MKR.

Introduction low-cost IoT device for mobility-impaired users.

With MKR1000 and Azure IoT Hub, STM32F4 Discovery Board is used to send acceleration and other random telemetry data to Azure IoT Hub.

Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.

Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.