Employee access to the enterprise using RFID tags and employee temp measurement using a contactless thermometer that sends data to the cloud
Project tutorial by Victor Petin
An automatic temperature scanning gate is presented to verify the body temperature of any intruder.
Project tutorial by RoboticsBangladesh
This project allows you to transmit DHT environmental data from your MKR1000 to your own customizable Google Sheet for data logging.
Project tutorial by Stephen Borsay
Keep up-to-date on the passing of your favourite satellites overhead with this 3D-printed, Arduino-controlled satellite tracker!
Project tutorial by alex_chang
Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.
Project tutorial by JoaoLopesF
Fancy to see your's vehicle data online in real-time? If so, continue reading!
Project tutorial by jassak
Set an alarm with MKR1000 and MKR Relay Proto Shield to turn a lamp on/off.
Project tutorial by David Escobar
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy
Project tutorial by Technovation
Forgot your keys? Unlock the door using an RFID combination sequence from hidden tags.
Project tutorial by Kirby G
The smart insole collects foot pressure data in real-time. Through Thinger.io the information is fed into a system that visualizes the data.
Project tutorial by Juliette van der Pas
An amazing off-road robot with 4-wheel drive.
Project tutorial by Jithin Sanal
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
Project tutorial by WesleyCMD
A sensor That detects when a diaper needs changing.
Project tutorial by Keep Me Clean
Frustrated with the prices for high quality grow light systems? Let's design a fully controllable, easy to adjust, open-source LED panel.
Project tutorial by Dmitrii ALBOT
Do you want to conserve energy and turn the Christmas tree lights on/off when not required? In IOT era, that can be done using MKR1000.
Project tutorial by Sameer
Using websockets on one Arduino MKR1000 connected to wifi, I send temp & humidity data to a chart setup on HighCharts.
Project tutorial by cb77
Use to record somebody's blow strength. Since without calibration it is relative value.
Project tutorial by Wen-Liang Lin
Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.
UV sterilization lamp based contactless Helmet sterilization box is presented in this project.
An automated sanitizing system for shoes is presented throughout this project. Shoe sanitizer is used to disinfect shoes.
Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent
Project tutorial by greg
Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.
A Remote Patient Monitoring System that gives health workers remote access to patient's vitals without physical contact with patients.
Project tutorial by Le'Knox Ayenie
A pen holder that determines when there are two or less pens and triggers an Amazon pen set replacement.
Project tutorial by Alex Merchen
Or connect with your social account:
New here? Create an account