IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.

Control your media player using simple hand gestures. No complex circuit. Works on all computers.

Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.

Monitor the world's rivers and lakes through a collaborative cloud allowing you to monitor any body of water with a fleet of devices.

This is a project based on Arduino MKR GSM 1400 that will send a text notification when it senses rain drops.

Ceri could provide reliable real-time data to the processor to monitor the drying stage of coffee beans.

See on a web page all the information collected by the MKR ENV Shield connected to a MKR GSM 1400.

In this tutorial, you'll learn how to connect your Arduino MKR GSM 1400 board securely to Google Cloud Platform (GCP) IoT Core.

Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.

Use an Arduino MKR GSM 1400 and a Blynk app to control the two relays of the MKR Relay Proto Shield.

Control everything with a SINGLE phone call.

A guide for the Hologram.io Arduino MKR 1400 GSM workshop for IoTDevFest PHX 2019.

Drive the relays of the MKR Relay Shield connected to a MKR GSM 1400 with an SMS.

Get the position of your MKR GSM 1400 on your smartphone through an SMS with a Google Maps link.

Sending Machine to Machine Commands with a Twilio SIM and an Arduino MKR GSM 1400.

How to play an MP3 file with Twilio Programmable Wireless, Go and the Arduino MKR GSM 1400.

Using the MKR GSM 1400 to collect and visualise data from a battery operated IoT sensor over a cellular connection.

Use some basic hardware and a 3g connection to see if the little man inside your fridge turns your light off when the fridge door closes :)

A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.

An indoor air quality monitoring system for detecting toxic gases.

Use Arduino CLI tools to code, compile and upload programms to your Arduino Board. Follow this tutorial for getting started with arduino-cli

The project Arduino and RFID Based Attendance System With GSM is a simple and is used at any place where attendance is taken for maintainin

Simple enclosure and breadboard to mount Arduino MKR boards in a cabinet for prototyping.

How to set up a MKR GSM 1400 and publish an event or location to Wia.