Yes, you CAN load and display BMPs from that card reader on the back of your tiny TFT screen!

Arduino Running Man Game in 2 Minutes | Arduino game with touch sensor| Part 2

This will prevent you from going back to sleep after snoozing that since now you have to solve a math problem to snooze the alarm.

Make your own Arduino coin eater/bank. A DIY Arduino idea.

Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.

A four-digit seven-segment counter with three options.

We will teach you that it is possible to write only one Serial.print line to display several messages.

This project demonstrates the working with Shift Register.

This is a simple library for the common anode LTS 546AWC single digit display. Allows to turn on off segments and display digits.

This project illustrates switching using a transistor.

Why you can blank, void setup()

Drag-and-drop graphical programming portable software for Windows + uploading + supervision.

A program to automatically create header file with mapped custom named IR buttons that we can easily call with Arduino IDE.

This motor driver is able to control a motor using PID by I2C. Taking precise control of a motor have never been so easy.

The purpose of "kukO2“ is to detect the CO2 content in indoor areas.

An advanced home automation project with Arduino Uno and Bluetooth sensor to control it, anytime from anywhere.

My project helps visually challenged people to walk without crashing into walls and obstacles. This help them to live freely

Making a simple system to controll a lamp or some other appliance in your house.

Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.

This tutorial will show you how to use DHT11 with Arduino.

Read the soil moisture level (Dry-Perfect-Wet) and display results on a corresponding LED.

In this tutorial, I will show how to interface a 5V relay with Arduino and control an AC load.

Just drag and drop prefabs to make a PC user interface to Arduino, without coding in PC.

BLYNK app based remote used to control a bot.