Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!

Building a wireless, battery-powered GPS tracker using a Helium Atom, Arduino Zero, Azure IoT Hub, and Power BI.

I had to delve deep into the code, but I finally got nodebots working on an Arduino Zero

We're pretty good at maintaining our code base, not so much at maintaining our office plants. We use Arduino to keep our plants alive.

How to develop a simple but powerful IoT thermometer using a Zerynth-powered single-board MCU and the Zerynth App.

Use the PN532 NFC available on the anduinoWiFi shield to create an RFID keycard building access system.

Stop reflashing your devices everytime the WiFi password changes! Learn how to use anduinoWiFi and AP mode to initiate WiFi registration!

"You just say what the thing does and then you add '-er'." Replenisher keeps your fridge, office...stocked! Just scan! "I'm going on break!"

Seismic activity or "Vibrations of the earth" is measured using ProtoCentral's OpenPressure 24-bit DAQ System.

We initially made HealthyPi as HAT add-on board for Raspberry Pi. Now you can run the application on any desktop PC with a USB port.

Connect your anduinoWiFi to IFTTT. Control everything around you, or 'let go' and let random events in cyberspace control your surroundings!

Read CO2 and tVOC data using CCS811 I2C sensor breakout by itbrainpower.net. Temperature and humidity read compensation notes.

Three ways to use Arduino as a USB to TTL converter. Helpful one!

Consider this the "Blinky LED" of the anduinoWiFi shield!

Get connected to Adafruit IO using MQTT! This project explains how to stream DHT22 temp data to Adafruit IO's dashboard!

How to read HDC2010 temperature and humidity sensor data and comfort zone alerts Arduino using HDC2010 I2C breakout by itbrainpower.net.

Run a powerful open source Operating System on Arduino Zero to blink an LED on the board and open up a whole world of control capabilities!

Realtime environment configuration via NDEF records and RFID tags! Just scan to change the text color!

Arduino how to - using BME280 (temp, hum and press sensor) I2C breakout from itbrainpower.net and Arduino 3.3V or 5V shields.