Learn about personal electric move, build your own e-bike controller, add the behavior and the features you want.

Brought to the marked in 1976, Zilog's Z80 was the most widespread processor in the '80s until the 2000s. Let's bring it to life again!

An open source, Arduino and Python-based advanced humanoid robot!

The will gimbal a rocket motor back and forth to keep you rocket upright.

An Arduino-controlled delta robot built with fischertechnik: fast and precise pick and place robot.

It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.

A home automation and Internet of Things project using Arduino Mega 2560 and ESP32.

Use the concepts in light painting to create a machine that can recreate bitmaps with a long-exposure camera using a single LED.

è un automazione di un braccio pneumatico in grado di smistare il legno da ferro

This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".

Indoor golf terrain which is supported by electrical jacks and controlled by Arduino and Pi to move jacks and make terrain of your choice.

Replacing the old and expensive mechanical system with the much reliable and cheap electrical system using Arduino!

My kids love balloons, and they know that daddy is almighty. :)

PLC IEC-61131-3 ladder programming >>> Modbus TCP/IP >>> PID tuning >>> HMI >>> Wiring diagram.

A table with 576 moving plates, decorated out of aluminum cans, which react with a camera in the manner of Daniel Rozin.

A desktop train controller based on Arduino for OpenBVE.

It can give you a controlling device that can helps you to build an underwater robot communicating via Ethernet cable.

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

Robot wirth stepper motor via microstepping, digital motion processing, auto tuning, cascaded PID controller and now with Joy Stick Control.

A fully autonomous robot lawn mower.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.

An Arduino Mega controls a MIDI-data stream to 30 plates equipped with solenoids and lets them playing any sound.

This project will show you how to make a DIY flashing LED cube.