A morphing digital clock

Turn your melodica into a compressed-air melodica controlled by Max and Arduino. It tries to follow the melodic contour it listens to!

Closed loop universal motor control system using PID algorithm.

Need fast cheap laser rangefinder for your Arduino project? You can use a laser tape measure for this!

How to control several roller shutters with inexpensive relay boards (not ruining them) with physical buttons and remotely simultaneously.

Make your own infinity mirror clock!

A freeform interactive snowflake animated by Arduino Nano. Using 17 independent PWM channels and touch sensor it can create awesome effects!

This device measures fine dust and NO2 concentration in the air while on the move and adds GPS coordinates to each measurement location.

Imagine being outside cell phone range. How do you broadcast where you are for help? Enter an APRS tracker to broadcast location info.

In this tutorial I am going to show you how to build a Wireless Weather Station with a big 3.2" Color TFT display using Arduino.

cpm4nano - CP/M-compatible computer based on Arduino Nano.

In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller

Ever asked how to control any device from any place in the world? In this tutorial, we'll learn how to control things wirelessly over WiFi.

Arduino controlled auxiliary saddle bag lights for a motorcycle.

The hydroMazing system manages your growing environment by making localized data-driven decisions so that you don't have to worry.

Let's take a break during navigation while Autopilot follows the route, control it with remote control!

A super smart buoy with lots of sensors that sends data over radio to a base station where it is displayed on a real-time dashboard!

A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.

A clock which rewrites time again and again.

Using 2 ATmega328s, this clock displays and decodes the DCF77 signal using 150 LEDs and 4x 7-segment display modules on a 12" (305mm) dial.

Want a cool spider-like robot to wear around and impress your friends? Well, this is the bot for you!

This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.

Follow this project to make an infrared thermometer by yourself!

A clock with a real rotating moon.