A 3D-printed mini jukebox powered by Volumio. Streams your music, Pandora, Spotify and AirPlay. Sound-reactive LEDs dance to your music!

Magnetic levitation of an 11 cm (4.3") illuminated globe, rotating at a constant speed and nicely fitted inside a wooden lantern.

Closed loop universal motor control system using PID algorithm.

A cheap version of an Arduboy clone with which you can play a number of original Arduboy games.

Ever asked how to control any device from any place in the world? In this tutorial, we'll learn how to control things wirelessly over WiFi.

I used ten small vibrating motors for a musical performance with one performer on a (baby) grand Steinway piano.

Need fast cheap laser rangefinder for your Arduino project? You can use a laser tape measure for this!

Use Arduino and Raspberry Pi to get notified if a hot water heater pilot light goes out.

Word clock with linear display of seconds includes modes for digital clock, analogue clock, temperature and humidity, plus three games.

In This Tutorial, I will Show You How to Make an Arduino Based MPPT Charge Controller

Turn your melodica into a compressed-air melodica controlled by Max and Arduino. It tries to follow the melodic contour it listens to!

Let's take a break during navigation while Autopilot follows the route, control it with remote control!

Arduino Stepper Motor Barometer with additional displays for last 3 & 6 hour pressure changes.

Programmable, circular, wearable LED array.

How to Make a Non-Touch Doorbell, Body Temperature Detection, GY-906, 433MHz using Arduino

View the water integrity and level of selected areas on your Android phone by using an HC-06 Bluetooth module to make an irrigation system.

This innovative CO2 monitor for schools and offices helps to keep the virus away with an all new, yet very familiar design, a Wall Clock.

Track the total volume of water spent and evaluate approx. evaporation rates by temperature, humidity, and pressure to prevent water overuse

Feed the poultry in quotidian routine to condition them - sensory preconditioning - to improve egg production and hatching process.

A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.

How to build a DIY Electric Skateboard faster than one you can buy, using an Arduino Nano to control the programmable lights.

Learn how to make a 2-axis gimbal for your action camera (GoPro) within $30!

Baby MIT Cheetah Robot is the previous version of this robot. I did lot of changes in this version.

PID control on Arduino with LabView to stabilize a ball on a beam.