This project, known as Biotronics, was conceptualized to create synthetic species that look alive or with life and make them conscious.

Use the program to manage your ESP module with simple commands. This will allow you to access the Internet for any Arduino product.

With a bigger screen come more possibilities.

An Arduino noticeboard using a Bluetooth module.

A unique TFT shield expanding the capabilities of an Arduino Uno.

6-channel digital sampling oscilloscope with built-in frequency counter, maximum sampling rate 47kHz.

A simple interface circuit to drive VFD displays. No fancy parts required, and runs on serial communication.

Aim of this project is to improve the experience of the visually challenged, while making cashless transactions in public.

Trashware is a project which aims at environment cleanliness through smart devices.

Spending $1,000 on suspension repairs because the city failed to fix the potholes? This project makes sure that never happens again.

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

An IoT wearable technology to haptically guide users with visual impairments/obstructions while monitoring their environment.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

Water quality, anywhere, anytime!

This is an Arduino camera module, using the surveillance camera's digital image processing chip-OV0706.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

ARTIK cloud-based smart parking system.

We will try to make a simple CNC machine with you.

Arduino Safe - 6 digit Passcode

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

Vintage-style, minimal sized enclosure for a Raspberry-Pi + Arduino Internet Radio.

Traffic Light Information System that lets the driver know at which speed he needs to drive in order to pass the green light.

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.