Do you know of the famous WS1012 LEDs? The PL9823 is the cheapest LED that uses the same protocol of the WS1012. Let's blink LEDs!
Project tutorial by Giovanni Gentile
Have the scariest Jack-O-Lantern on your street by adding glowing lights and spooky music!
Project tutorial by aams86
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
How to use the new Arduino SDU library for SAMD boards to update the sketch on your board, putting it on an SD!
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Project tutorial by Andrei Florian
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
Arduino recently launched support for programming ARM-based SBCs using the Arduino web editor, and Raspberry Pi is one of those SBCs.
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
This project creates a relay and a water pump for monitoring moisture.
Project showcase by Ingo Lohs
Waiting for Santa? Count down to his arrival with this MKR1000 device.
Project tutorial by Arduino_Genuino
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri B
Easy 'Hello World' with an RF 433MHz transmitter/receiver module and Arduino.
Project tutorial by hixel
This is the next step with an Ultrasonic HC-SR04 Echo and LCD 1602.
Project tutorial by Ingo Lohs
Use libArduino and MRAA to interact with the board OS and report some nice stats with LEDs.
Project showcase by Arduino_Genuino
A very simple sound card / synthesizer circuit using NE555 and MCP41010.
Project tutorial by Team Useless 98
When you have a 'real' Christmas tree, it is important to keep it watered. This project monitors the water level and emails alerts.
Project showcase by Ian Zahn
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
At my age you have to get up at night and tend to be tired on the way to the bathroom. Use a PIR-Sensor to trigger the light on!
The purpose of the project is to detect the passing of cars and people at the entrance to an orchard and a warning beep inside this house.
Project tutorial by Juan Salvador Aleixandre Talens
Automatic fans act in stages depending on atmospheric conditions with an alert at full capacity.
Project in progress by Bob Computeers
This is a low cost robot that will help students in better learning and understanding.
Project showcase by utk6533
This project started from FabLab of Boilchon High School. Turning the button changes the sound.
Project showcase by FabLab of Legends
The purpose of the project is to create a system of selective opening of shop windows.
This creates a rotating platform for displays.
Or connect with your social account:
New here? Create an account