Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it.

In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.

This tutorial will illustrate the working of an RFID reader.

Connect your microcontroller to the internet by adding ESP8266 WiFi module!

In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.

Sending Bytes to an 8x8 LED Matrix.

An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

Learn how to use the Arduino Desktop IDE at its best and install it on your PC!

Things you should know using ESP8266 WiFi module for its safety and easiness as it's very delicate module to use.

In this tutorial, I will show you how to install the dark theme for your Arduino IDE for the reason of overexposure to the screen light.

A simple Arduino clock without RTC module for beginners.

Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.

In the first example, we will send “Hello world” command to blink the LED. In the second example, we will do bidirectional communication.

Make a simple and programmable servo arm out of readily available materials!

We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.

We're showing how to use KY-038 Sound Sensor using Arduino. You can control LED by clap with the help of Arduino and sound sensor.

Simple Arduino Uno - ESP8266 software serial integration.

A basic introduction to the low cost and accurate HC-SR04!

Here, you will learn how to use TFT LCDs by Arduino. From basic commands to professional designs and technics are all explained here.

Use the DHT Temperature Sensors in C# code via a C++ Windows Runtime Component to implement a one-wire protocol on Windows 10 and the RPI2.

An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.

This tutorial will show you how to use DHT11 with Arduino.

A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.

This project will show how to set up a 16 x 2 LCD screen and display multiple sensor values.