Get familiar with the Arduino IoT Cloud and take your first steps into the world of connected objects.

Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!

Real time plant monitoring system to view temperature, light exposure and moisture.

Host a Telegram Bot on your Arduino and chat with your brand new IoT device!

An unofficial tutorial for getting started with the MKR1000 board as there are no official one yet.

Connect a basic sensor station to Arduino Cloud and visualize real time data.

The Rural Hack Kit is the perfect electronic set to get started hacking farms, gardens, or even plants on your balcony.

With this tutorial, you will learn how to get the weather data from a web service to your Arduino.

An easy-to-build and low-cost water quality monitor.

Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.

Ever wanted to control a cockroach on the cheap? Now you can!

Create your Blynk mobile app to monitor your garden and activate the irrigation.

This is a project that will show you how to create a Wi-Fi controlled RC Car that will recharge wirelessly while it is parked.

Monocle enables Alexa devices such as Echo Show/Spot & FireTV to view your network IP cameras & control them with a wireless PTZ controller.

Getting started with Python and Arduino MKR1000 for secure IoT projects.

Secure OTA via Azure. Control via voice capable UWP app. Includes sample: room thermostat controlled via phone.

Setup an Arduino MKR1000 board to read temperature data and send those readings to ARTIK Cloud for monitoring.

Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.

A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.

The car is moving by two dc motors and turn by setting one motor over bluetooth using Android App on Andriod phone.

If the WiFi connectivity goes down, this will reboot the router.

Recycle your old cellphone to build one and connect it by a browser to your new phone, PC or tablet!

This is the "Sensometer", a great example of IoT! Get all sensors working at once!

This simple project shows how to make an app that controls an Arduino MKR1000 board with Evothings Studio by communicating over the TCP.