Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!

An unofficial tutorial for getting started with the MKR1000 board as there are no official one yet.

Get familiar with the Arduino IoT Cloud and take your first steps into the world of connected objects.

Real time plant monitoring system to view temperature, light exposure and moisture.

Host a Telegram Bot on your Arduino and chat with your brand new IoT device!

Periodically measure environmental conditions and send them to WolkAbout IoT Platform to monitor the environment remotely.

Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.

In the second project in my pick to light, I am using WIFI to pass the data between PC and Arduino.

Ever wanted to control a cockroach on the cheap? Now you can!

An easy-to-build and low-cost water quality monitor.

If the WiFi connectivity goes down, this will reboot the router.

Secure OTA via Azure. Control via voice capable UWP app. Includes sample: room thermostat controlled via phone.

Improved serial debugging, with debug levels and simple software debugger, to see/change global variables, add watch, or call a function.

Connect a basic sensor station to Arduino Cloud and visualize real time data.

This is a project that will show you how to create a Wi-Fi controlled RC Car that will recharge wirelessly while it is parked.

The Rural Hack Kit is the perfect electronic set to get started hacking farms, gardens, or even plants on your balcony.

Arduino MKR1000 with Windows 10 remote arduino using Wifi connection.

You can control your MKR1000 remotely with a RESTFUL interface.

This simple project shows how to make an app that controls an Arduino MKR1000 board with Evothings Studio by communicating over the TCP.

With this tutorial, you will learn how to get the weather data from a web service to your Arduino.

A WiFi controlled NeoPixel display. Designed for the MKR1000 but should work for the Zero too. A little rough around the edges but works!

Monocle enables Alexa devices such as Echo Show/Spot & FireTV to view your network IP cameras & control them with a wireless PTZ controller.

A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.

Setup an Arduino MKR1000 board to read temperature data and send those readings to ARTIK Cloud for monitoring.