Take readings from the DHT11 Temperature/Humidity sensor and display them on the Arduino IoT Cloud.
Project tutorial by Arduino_Genuino
This project will show you how to set up an Arduino IoT Cloud dashboard and display multiple sensor values.
We are going to make an amazing compact joystick using Arduino. We can use this joystick to control our DIY Robots and PC Gaming.
Project tutorial by Jithin Sanal
This project controls lights based on the moisture levels detected! #cloudgames2022
Project in progress by taxy1732
Do you want to know the conditions before you jump into the water? Use the IoT cloud to check it out before you go!
Project tutorial by areifsnyder
Make a car detecting radar with GPS and IOT.
Project tutorial by coloitu_
Easily check liquid level with Arduino Cloud.
Project showcase by Karoldus
This project simulates a Smart Classroom automatic attendance using RFID module and classroom environmental monitoring using DHT11.
Project showcase by anaferraz
Use to record somebody's blow strength. Since without calibration it is relative value.
Project tutorial by Wen-Liang Lin
Use the Arduino IOT Cloud to set a temperature goal and switch a red and green LED on /off to represent
Project tutorial by greg
Connecting your Arduino to the Arduino IOT Cloud and display the temperature on the Cloud.
Using the Arduino Cloud API to obtain IoT data for your MIT App Inventor apps.
by Harry Anderson
Learn how to control your MKR RGB Shield using Arduino IoT Cloud and Amazon Alexa.
Project tutorial by 3 developers
Learn how to use Arduino IoT Cloud and Amazon Alexa to switch the channel, adjust the volume and turn on or off any TV.
Project tutorial by 4 developers
Let your legacy mailbox send you SMS notifications, thanks to IFTTT.
Project tutorial by Adrien Sales
The LittleBot is a simple 3D printed Arduino robot for kids to get introduced to STEM.
Project showcase by Slant Concepts
A simple and funny project with an Arduino UNO and the famous keypad shield. Arduino selects a random number, you guess the number.
Project tutorial by Giovanni Gentile
This is a low cost robot that will help students in better learning and understanding.
Project showcase by utk6533
Do you know of the famous WS1012 LEDs? The PL9823 is the cheapest LED that uses the same protocol of the WS1012. Let's blink LEDs!
If you want use two Arduino, you can use a simple I/O port to communicate. The point of question is the Ground.
by Giovanni Gentile
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
Learn how to submit your Arduino-based project. It may even get featured on the Arduino social channels!
Or connect with your social account:
New here? Create an account