Ever thought of controlling any electronic devices with your smart phone? Today I will show how to do it.

In this protip, I will show you how to build DS18B20 Digital Thermometer with Arduino.

This tutorial will illustrate the working of an RFID reader.

Connect your microcontroller to the internet by adding ESP8266 WiFi module!

In this tutorial, we will learn how to detect Smoke and inflammable gases using an MQ-2 sensor.

Step by step on how to program a ATtiny85 microcontroller with Arduino Uno development board.

This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Sending Bytes to an 8x8 LED Matrix.

This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.

Writing in a 4 digit 7 segment LED display.

Simple Temperature Monitoring with DHT22 & Arduino.

Arduino's great, but how in the world do you do two (or more) things at once on separate intervals? You need protothreading!

Turn an LED on and off using Windows Remote Arduino.

Things you should know using ESP8266 WiFi module for its safety and easiness as it's very delicate module to use.

This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback.

A simple Arduino clock without RTC module for beginners.

A greenhouse capable of dealing independently with the plans inside it communicates with the external environment through signals.

In this tutorial, I will show you how to install the dark theme for your Arduino IDE for the reason of overexposure to the screen light.

Upgrade your home security camera or webcam with a motorized stand that will detect and follow any motion around the camera!

Make a simple and programmable servo arm out of readily available materials!

Interfacing MAX30102 with Arduino + BPM measure project with OLED + buzzer.

Take readings from the DHT11 Temperature/Humidity sensor and see them from the Arduino IDE Serial Monitor.

In the first example, we will send “Hello world” command to blink the LED. In the second example, we will do bidirectional communication.

We are showing how to use DS18B20 one wire water proof temperature sensor using Arduino.