A really economic street lighting system.
Project showcase by ReddSathvik
Use only 3 digital pins on your Arduino to display characters on the single digit 7-segment display.
Project showcase by goarray
The Memory Game
Project showcase by Ikhsan Ismail
Wheelchair whose motion can be controlled using simple hand gestures.
Project showcase by Monil Patel
A theremin made out of two ultrasonic sensors.
Project showcase by opus9
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
Ariadne's Thread is a project born to fulfill the wish to automate an old game.
Project showcase by Claudio_Canavese
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Project showcase by HomeSafety
A large 4-digit 7-segment counter with LiPo backup, in case USB power is cut.
Project showcase by Ratti3
An alarm clock with no physical buttons, just a remote control.
Project showcase by Robin The Tactician
In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.
Project showcase by rayatedarshan
Randomly select a destination for one wagon on a Timesaver layout or randomly select order of wagons for an Inglenook layout.
Project showcase by Leadie69
A single Arduino Uno/Mega can carry up to 14 RS-232 boards. Each board is distinguished by ID, which is set via a DIP switch.
Project showcase by phpoc_man
Bongo Hero is inspired by Guitar Hero. You must tap bongos at the right time. Color changes and speed increases as you level up.
Project showcase by Etienne Daspe
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.
Project showcase by Varul Jain
Analyze digital inputs on up to six channels using the ATmega328 (e.g. Arduino Uno / Nano / Ethernet / Mini).
Project showcase by drshihan
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
Get the speed of your die-cast toy car!
Project showcase by NerdFatherRJ
An Ardiuno project using NeoPixels to create slowly changing christmas light pictures in my window.
Project showcase by ElBanquo
I took an HC-05 and added it to my handheld GPS device to get coordinates on my Android tablet.
Project showcase by Arnov Sharma
Basic weather system, in/out temp and humidity with heat index, dew point, pressure and weather prediction and time and date.
Project showcase by Fathead
A pseudo theremin using the HackingSTEM finger sensors.
Project showcase by Gergely Nádori
Or connect with your social account:
New here? Create an account