Capacitance capabilities at the tip of your finger!
Project tutorial by Tal O
Building an RFIDD access control system.
Project tutorial by Electronic Clinic
One port to role them all.
by Tal O
A small compact outdoor motion activated Halloween scare box with sound and optional light.
Project tutorial by syn
This will prevent you from going back to sleep after snoozing that since now you have to solve a math problem to snooze the alarm.
This is an example problem to illustrate the function of a PID controller. You will learn the basics to control the speed of a DC motor.
Project tutorial by NG-Design
This small and attractive device periodically displays an attention-catching animation followed by the current temperature in C° and F°.
Project tutorial by Kian Calnan
This is a very simple way to control a 3-phase AC installation in a delta configuration.
Project in progress by philippedc
If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.
Project tutorial by MEGA DAS
Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!
by Jen Fox and Hacking STEM
Make your own Arduino coin eater/bank. A DIY Arduino idea.
6.4A-20nA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.
Project showcase by wfriedrich
Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.
Project tutorial by plouc68000
Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.
Project showcase by Konstantin Dorohov
How to interface an IR sensor with an Arduino Uno.
Unlock each of 16 (4x4) locks to crack the bigger lock by flipping the states either horzontally or vertically.
Project showcase by Krishna Lalith
The Arduino clock that says it as it sees it.
Project in progress by Tal O
Build a simple 3-axis joystick!
Turn an LED on and off using Windows Remote Arduino.
Project tutorial by Windows IoT
This is an Arduino Uno with a DHT11 temp/humidity sensor with and LCD screen powered by a power bank.
Project tutorial by ThothLoki
Connect your microcontroller to the internet by adding ESP8266 WiFi module!
by Jefferson Paredes
Step by step on how to program a ATtiny85 microcontroller with Arduino Uno development board.
Project tutorial by Arjun Ganesan
Use the DHT Temperature Sensors in C# code via a C++ Windows Runtime Component to implement a one-wire protocol on Windows 10 and the RPI2.
Project tutorial by Daniel Porrey
Or connect with your social account:
New here? Create an account