With the recent loss of the Samsung SmartShield I have created a replacement solution using the Arduino Wireless Shield and an Xbee S2C.
Project in progress by CR76
Robotic arm controlled by bluetooth controller.
Project in progress by Team Basso&Delmoro&Gramaglia
This is a model circuit that can control the speed and the direction of a dc motor without the h-bridge ( it's an alternative to h-bridge ).
Project in progress by Joao_Claro
Fully autonomous rocket!
Project in progress by Cole Purtzer
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Project in progress by Ankel2000
The hybrid rocket Chimera is a project of the Loughborough Space Society. This hackster. io project shows insights into the electronics team.
Project in progress by Chrisy | Variint
This project focused on the calculation of machine efficiency along with various parameters visualized on IBM Watson IoT platform.
Project in progress by Pratik Roy
Count the number of people entering and leaving a room by this counter.
Project in progress by pratham_bhomkar
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
Project in progress by philippedc
Light and presence detector project to properly control LED bulbs automatically.
Project in progress by Joaquim Silveira
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]
Project in progress by Fransie Streicher and Kaamil-Inaam Naicker
Replace an unreliable cheap pressure switch with an Arduino-controlled high current relay. Ver 2 now includes an auto drain valve.
Project in progress by RedTar4
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
Giving you the ability to add more buttons than analog inputs allow with some restrictions.
Project in progress by amosp33
DNA-Dave is striving to be the best tool to teach kids molecular biology concepts. The key word is "striving."
Project in progress by sami.s and Ioannis Tamvakis
We're developing a prototype for a cheap and easy-to-use probe with a potential application in detection and monitoring of cancerous tissue.
Project in progress by Team AccuPatch
We aim to provide a low-cost precision agriculture solution powered by biophotovoltaics, and we start with developing a prototype.
Project in progress by eCO-SENSE
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. Update : V2 with a PCB.
A raspberry pi based cereal phenotyping device
Project in progress by Team MacroImager
This project will show you how to make an automated watering system and water level indicator.
Project in progress by Saikan45
Arduino Uno-based device intended for negative wound pressure therapy for hospitals in the developing parts of the world.
Project in progress by jpaulmrphy
Or connect with your social account:
New here? Create an account