Arduino/Intel Edison project with a stroboscope and motor controller. This setup can easily be used to create film sculptures.
Project in progress by Harlen Bains
The Zeus Weather Station (ZEWS) is an initiative of the Harry Fultz Institute Open Source Club to promote open source hardware and software.
Project in progress by moisi
Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.
Project in progress by damonlane
Do you always slack off on your computer and worry about getting busted? Not anymore!
Project in progress by Najad
This is a musical Tesla Coil driven by an Arduino and Slayer-Exciter. Using an Arduino, you can play music with pure electricity!
Project in progress by Brandon Michelsen
Home power usage monitor, implementing for the Arduino Due. This sketch show running average of voltage, making it easier to dial it in.
Project in progress by xekon
This project focused on the calculation of machine efficiency along with various parameters visualized on IBM Watson IoT platform.
Project in progress by Pratik Roy
Ever wanted to be able to upload your code directly from Notepad++?
Project in progress by Tal O
Add cheap 315/433 Mhz Outlets typically found around Christmas. Etekcity has been reported to work well. Uses RC-Switch Library.
Project in progress by Keith Croshaw
Phillips made what is called Ambilight, a backlight that responds to what is on screen, but we made it bigger.
Project in progress by Dan Fein
A part Arduino, part Java project that aims to recognize compound whistle commands, e.g. to activate a fan, or even steer a drone.
Project in progress by hans k
An open source kit to build a walking smart robot dinosaur.
Project in progress by Jacquin Buchanan
A small program for receiving visual notification of a Gmail message.
Project in progress by Realrlmf
Project that integrates Arduino, RTC display with I2C, RFID reader and SD card module.
Project in progress by Gedeane Kenshima
A spotlight, for stage lighting, with a remote control. The input will be a DMX512.
Project in progress by Manfredi Soldano
Count the number of people entering and leaving a room by this counter.
Project in progress by pratham_bhomkar
Basically a digital clock that can have the time changed at the press of a button.
Project in progress by SharKode
Beekeeping (or apiculture, from Latin: apis "bee") is the maintenance of honey bee colonies, commonly in hives, by humans.
Project in progress by Petrache Valentin
The Nixie Shield allows an Arduino board to connect any Nixie tube to use in your projects.
Project in progress by Marcin Saj
Use your Arduino and build Nixie clock, thermometer and hygrometer. Beautifully made housing and easy to operate.
All in one DMX, sound and video controller.
Project in progress by Team Patek
A retro digital clock with count up timer feature and automatic dimming to match ambient light conditions.
Project in progress by randtekk
With Arduino Yun and an accelerometer, monitor clothes dryer vibration, respond to status inquiries, and alert via SMS when the dryer stops.
Project in progress by WrinkleFree
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
Or connect with your social account:
New here? Create an account