A LED strip development multipurpose module
Project in progress by Anas Mo
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
The task was to control a lighting system with an Arduino via DMX.
Project in progress by max_loser
For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.
Project in progress by CesarSound
Replaced a bad keypad on the outside of my garage door.
Project in progress by ddsitzmann
Not your typical wall clock that tells time, it also becomes your wall light panels that lit up your scifi-like bedroom.
Project in progress by Mark Daniel Belarmino
This is a project of Radio Receiver LW/MW/SW Stereo FM with RDS, using Arduino Nano, Si473x Radio IC and 1.8in TFT color display ST7735.
Custom car infotainment system with Arduino and Android head unit, interacting with the car over CAN BUS.
Project in progress by Ashcon Mohseninia
I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.
Project in progress by Michael Rechtin
Shoes cleaning system with an electronic mat that keeps the healthy distance, cleaning time and shoes pair count for maintenance.
Project in progress by isaacpachecogo and quijanov
GrumpyHedgehog allows you to communicate with signs and movements to send keyboard commands, turn lights on/off, count people in a room...
Project in progress by Jean Perardel
An affordable, easy, and touch-free solution to select floors in an elevator
Project in progress by vf31jgj and 2537867363sky
Add more fun to bottle rockets!
Project in progress by mbagrianski
Rotary Encoder USB Control with single and double click action.
Project in progress by freermottram
This study is an example how to build a 3-phases 230V/380V from a 12-24V DC with an Arduino Uno
Project in progress by philippedc
A cheap and easy to use BLE Armband for Social Distancing and enabling Touch Free solutions for COVID-19
Project in progress by Utkarsh Verma
Here is my first step to crete the clock based on *x8 LED matrixes
Project in progress by mdraber
Timer for Arduino pins controlled by Serial monitor
Project in progress by scardeath0101
If you can't fix it in software you'll have to fix it in hardware in this case. Hence the NMEAtor.
Project in progress by Waps 61
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
A connected protective visor which helps to respect preventive measures against COVID-19.
Project in progress by Yayi Make
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Project in progress by srolf
Robotic arm controlled by bluetooth controller.
Project in progress by Basso&Delmoro&Gramaglia
Or connect with your social account:
New here? Create an account