A simple electromagnetic sensor to measure current induced by a moving magnetic field!
by Jen Fox and Hacking STEM
Develop an Android app that control a remote led connected to Arduino.
by Francesco Azzola
This completely open-source LTE shield for Arduino uses the latest and greatest CAT-M NB-IoT technology optimized for low-power IoT devices!
by Timothy Woo
A medicine vending machine to store and give doses via medicine bottles and alert patients at prescribed times.
An easier way to train and deploy Tensorflow Lite RNN model on Arduino Nano 33 BLE Sense - for micro speech recognition.
by Alan Wang
This system monitors the moisture of soil and waters it by 5v DC motor based water pump when needed.
by Neeti Thakur Bisen
ESP8266 ESP-01 chip provides a really low cost and effective way to communicate over the internet.
by Robin Kanattu Thomas
This project allows you to draw your own controller to be used with anything. It utilizes capacitive sensing and graphite's conductivity.
Record and play back a few seconds of input stored in EEPROM.
This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.
by Omron Electronic Components LLC
Tutorial on how to use the ADC Module of the ATmega328P
by Yeshvanth Muniraj
You will learn how I converted an RC car from my childhood days to an Arduino-based RC car.
Use a Bluetooth module to replace a traditional wired connection for transmitting serial data.
A system to maintain the pH level of a sample within a defined range.
by Atlas Scientific
How to temperature compensate the Atlas conductivity sensor automatically.
Real-time pH and salinity monitoring with LED indicators.
A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.
by Md. Khairul Alam
My project is a piano of four sounds that uses things that we find at home, bananas.
Upon scanning the right tag and entering right pass, it will open door and send confirmation message otherwise it will send alert message.
If there will be no traffic on the other signal, one shouldn’t wait for that signal. System will skip that signal and will move on next one.
This is a tutorial on how to make it work.
by Tauno Erik
Learn how to make a powerful Arduino GPS tracker that posts data to the cloud via LTE CAT-M and view data graphically on IoT dashboards!
The Pulse Express board makes it simple to get the three vital parameters - SpO2, Heartrate and Blood Pressure trending (BPT).
In this tutorial, we are going to learn how we can install python on our computer and how to use it with Arduino,It allows us to send data.
by Smart Technology
Or connect with your social account:
New here? Create an account