An environmental monitoring system using a Nano, with GPS, BME680, VEML6070, MiCS-5524, BH1750, a 128x64 OLED, and NeoPixels.
Project in progress by Pyre Mage
A desktop tetris game using 135 WS2812B RGB LEDs and played with a Wii Nunchuck controller.
Project tutorial by John Bradnam
Use Arduino, an OLED display and an AD9833 DDS module to create a useful wave generator for your lab.
Project tutorial by janux
Telescope or camera tracking system for astrophotography.
Project showcase by Nick
LED Mood Lamp using the popular WS2812 LEDs!
Project tutorial by Neeraj Rane
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
Easy implementation of Rev-limiter for Automotive or Motorcycle Engine.
Project tutorial by adrianos_botis
Introducing MARK 1, the programmable Arduino Robot Arm. But, that's not all, this Robot Arm can be controlled by Hand Gestures. Here's How..
Project tutorial by Eben Kouao
A low cost air quality monitoring device created with an aim to detect pollution hotspots caused due to traffic jams or factory emissions.
Project in progress by Tejas Shah and Tejas Shah
How to Make MP2.5 & Co2 Detect Wall Clock for Indoor using Arduino, MG811, GP2Y1014AU Sensor
Project tutorial by DKARDU
DIY AM/FM/SW/ DSP radio receiver, using Arduino Uno/Nano and a color display TFT ST7735 1.8in.
Project in progress by CesarSound
Make a Virtual Assistant AI Robot for Computer Automation and Little Chit Chat.
Project tutorial by ashraf_minhaj
A simple FM radio with a display that shows the frequency and audio amplifier.
Project showcase by Tauno Erik
This project presents program to detect musical notes and chords using Arduino (nano or above).
Project tutorial by abhilash_patel
A rather convenient device to monitor heart rate while running.
Project tutorial by Dmitry Dziuba
LED-Matrix Simon Game with orientation-control (accelerometer ADXL335) and integrated sound.
Project showcase by plcrpbqr
I'll show you how to make a 2-Wheel Bluetooth Controlled Car based on an Arduino Nano.
Project tutorial by Nikolaos Babetas
A small noise/drone synth with percussion mode. Made using the Mozzi library and two Arduino Nanos.
Project showcase by Daniel Sinderson
This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.
Project showcase by shajeeb
The lightmeter based on Arduino as a main controller and BH1750 as a metering cell. Information is displayed on SSD1306 OLED display.
Project tutorial by Vasyl Pominchuk
Pulse induction Metal Detector. It can detect a metal coin at a distance of 15 cm and a larger metal object at a distance of 40 cm and more.
Project tutorial by Mirko Pavleski
Garage parking sensor using addressable RGB LEDs to provide feedback to vehicle driver as they approach and reach stop (park) position.
Project tutorial by Bcjams
A cheap DIY air quality monitoring device.
Following the principle of the original Roulette, the movement of the LED simulates a ball whose speed gradually decreases until it stops.
Or connect with your social account:
New here? Create an account