Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
Project tutorial by Andrei Florian
In this tutorial, you'll learn how to connect your Arduino MKR GSM 1400 board securely to Google Cloud Platform (GCP) IoT Core.
Project tutorial by Arduino_Genuino
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Project tutorial by wahltharvey
Control everything with a SINGLE phone call.
Project tutorial by Arduino_Genuino and FabLab_CastelfrancoVeneto
The project Arduino and RFID Based Attendance System With GSM is a simple and is used at any place where attendance is taken for maintainin
Project tutorial by sarful
Monitor the world's rivers and lakes through a collaborative cloud allowing you to monitor any body of water with a fleet of devices.
Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.
Project in progress by damonlane
Using the MKR GSM 1400 to collect and visualise data from a battery operated IoT sensor over a cellular connection.
Project tutorial by Alexis Susset
Use some basic hardware and a 3g connection to see if the little man inside your fridge turns your light off when the fridge door closes :)
Project tutorial by smgs
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
Project tutorial by Muhammad Afzal
Control your media player using simple hand gestures. No complex circuit. Works on all computers.
Project tutorial by Jithin Sanal
Or connect with your social account:
New here? Create an account