Basically this device allows to control Relay Module via phone Bluetooth

Clouds meter <> establish the height of clouds through an IR measurement temperature of saturation.

The will gimbal a rocket motor back and forth to keep you rocket upright.

Building on and up! Using the lessons learned from the first tracker computer, we combine a bit of everything in this code.

Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor

We love electronic and plants, so we created a hydroponic system during the "Robotics in Family" activity at the Juan de Lanuza School.

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!

I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.

A 4 line x 32 character Braille display and keyboard for the Blind.

LIDIA is a Light Disinfecting Apparatus. It is used to quickly disinfect commercial spaces by contorting its geometry to concentrate light.

Interconnect solar street-lamps by adding monitoring and communication devices into them.

An open-source Arduino base remote controller (transmitter) with many customization options for robots and drones.

My 'Gorgy' clock! Enhanced with an IR remote, a TFT display, a barometer, and a humidity and temperature sensor.

ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.

A complete DIY weather station that submits its data to the "THINGSPEAK" website, where it can be viewed from any browser.

Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.

IoT water control for irrigation of truffles. It monitors and controls amount of water in storage tanks on field.

With a lot of inspiration from Boston Dynamics projects, I'm trying to make something great without million dollars.

Indoor golf terrain which is supported by electrical jacks and controlled by Arduino and Pi to move jacks and make terrain of your choice.

This is the FIRST PART of my build of the Rover in the movie The Last Days On Mars.

I have started to build it for a homemade amplifier, to set the speed of the fans by the temp of the heathsink and so on.

Robot wirth stepper motor via microstepping, digital motion processing, auto tuning, cascaded PID controller and now with Joy Stick Control.

Forward and Inverse Kinematics Library for Delta robot.

Aria is a voice-activated robotic helper for my mom.