If you need to debug your Arduino WifiNINA project remotely, plot charts of monitoring data, and more, this is the project for you...

A simple PCB keyboard that you can easily use for your Arduino project. Fully-customizable code provided!

Make your own quadruped robot with Arduino, 3D-printed, and Lego-compatible parts.

Relay VS Transistor.

A simple gesture-controlled interactive table light, which can encourage kids towards making.

A DIY instrument that you can play by moving your hands in the air!!!

Serial Studio is a multi-platform, multi-purpose serial data visualization and data acquisition software.

Discharge a fully charged Lithium-Ion cell through a resistor while measuring the current flowing through the resistor to calculate capacity

8Bit Digital Delay / LO-FI Bitcrusher / Reverse Speech DSP Pedal Effects for Guitar, Voice, Synths, etc.

A morphing digital clock

Visualizes the peak of frequencies with different bars on 8*8 led dot matrix using Arduino Nano.

DDS (Direct Digital Synthesis) Analog Devices AD9959 4-Synchronized Channels DDS Arduino Shield for Arduino MEGA 2560

VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.

Interface an Arduino Mega with an IDE drive or CF Card! It is easier than you might have thought!

The Pulse Express board makes it simple to get the three vital parameters - SpO2, Heartrate and Blood Pressure trending (BPT).

Via Telegram, control thermal printers remotely to print out notes, shopping lists, URLs, payments, barcodes, and episode release dates.

Turn your melodica into a compressed-air melodica controlled by Max and Arduino. It tries to follow the melodic contour it listens to!

Following the principle of the original Roulette, the movement of the LED simulates a ball whose speed gradually decreases until it stops.

Program an AVR-IoT WG board externally instead of the onboard debugger. I had to workaround as I bricked my nEDBG debugger on my AVR-IoT WG.

This function performs FFT with very good speed while maintaining accuracy.

I was inspired by obstacle avoidance car's servo's motion, I thought that it's motion could be used as sonar's acutator !

An easy DIY lamp which can change its colour like a chameleon. Just show it a different colour & see the magic.

RGB Tube Lights made using Arduino Nano and WS2812B LEDs.

Project uses an Arduino Uno and a pair of stepper motors to wind tonewheel organ pickups.