8x8 RGB LED matrix x 8 = 16x32 RGB LED matrix.

A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.

Ariadne's Thread is a project born to fulfill the wish to automate an old game.

A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.

A mini hovercraft able to detect and follow a black line and carry a 1/2 lb payload.

The mycelium machine transmits binary data through a mycelium mesh in the Earth. It does this so by manipulating the pH levels.

Ceri could provide reliable real-time data to the processor to monitor the drying stage of coffee beans.

An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.

An alarm clock with no physical buttons, just a remote control.

In this project, use the YF-S201 1/2-inch water flow sensor to measure the water flow rate (L/min) and display it on an LCD.

Bluetooth and Android-based call indicator with panic switch for calling a preset number.

Replacing the old and expensive mechanical system with the much reliable and cheap electrical system using Arduino!

Chess processor with GUI dedicated for Arduino Mega.

My kids love balloons, and they know that daddy is almighty. :)

Slider for medium camera, with programmable speed and paths.

This project aims to provide insight into the workings of a digital oscilloscope. This project is designed to be an education tool.

Bongo Hero is inspired by Guitar Hero. You must tap bongos at the right time. Color changes and speed increases as you level up.

WS2812 LEDs in drums!

In this project I created a pretty simple digital level using a LCD screen and a gyro sensor.

An Arduino based device to monitor the levels of combustible gases, carbon monoxide, relative humidity and temperature in the kitchen.

Race through your office at the speed of light! A project inspired by the OpenLEDRace project by @gbarbarov, made at Xing in Barcelona.

This is a cute linear stage that's about the size of a business card.

Clock to activate and de-activate a regular telephone wall connection to allow telephone calls only during selected hours.

Now we can check out the depth of the sea level by using a pressure sensor (MS5803–01 BA) connected to an Arduino, and display sensor data.