Tired of just flipping a switch? Try this!

This is a nice retro-look weather station and clock that I made with a POS VFD display for which I did not have any data and information.

The proposed IoT solution can be employed in various fields to connect devices or things to the internet.

This is a thermometer intended for measuring the temperature in the room where we are staying, also known as room comfort thermometer.

A mechanism that determines the speed at which your bike is traveling at.

Control a DC motor's speed and direction via Bluetooth through a mobile app.

Via Nano 33 IoT, display the follower count of a given Twitter account and its current follower status - STABLE, DEC, or INC.

A huge Nanoleaf like device made from soldering 12 PCBs each contains 7 WS2812B LEDs and anESP12F

A thimble which, thanks to a GY-521 and an Arduino Leonardo, is able to control the mouse pointer.

How to connect Atlas's Co2 sensor to an Arduino Uno.

Control and maintain stable relative humidity and temperature states to simulate natural conditions for experimental testing in the lab.

If you have to drill a certain depth for a project, you need a bench drill with depth display. See how simple it works in this project.

A calculator that work on 2.4 TFT LCD display

A hand-crafted 8x8 LED matrix driven on Arduino using the MCP23017 GPIO expander and controlled via Bluetooth from an Android device.

This project will show you how to make a RC Controller which communicates using 2.4GHz radio signal.

Automatic opening/closing of the front door of a chicken coop based on the day light measured by a LDR

The goal is to defeat wave after wave of descending aliens with a horizontally moving laser to earn as many points as possible.

In this age of WiFi and the Internet of Things, clocks should set themselves and be super accurate. It's about time!

While I exercise it plays music to keep me motivated and afterwards dispenses a reward, a Tic Tac!

Hey there, In this project, we are going to make an Arduino Voice-controlled boat. We have already made so many electronics and robotics pro

I build this device to stop myself from touching my face.

This Tesla Coil has been modified so that the spark "sings" melody generated by a sound source.

A stereo VU meter built with an Arduino Nano and two NeoPixel LED rings.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.