Portable lighting station synchronized with music, with the Infineon CoolMOS C7 MOSFET.

Another clock project with 1, 2" matrix display.

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

With this project, you can remotely control your car with Bluetooth.

This sample project shows how to build a LoRa connected UV sensor(I2C)

Digitizing household mechanical switches with CoolMOS C7. `

Prevent back pain by detecting bad posture and correct it immediately!

This is an original ternary digital clock running with Arduino! It's very simple and unlike anything you've ever seen!

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

During the summers, many people get sunstroke because of playing in the sun for too long. So this device will prevent getting sunstroke.

We want to show you how to improve the security of your digital data stored in a hard drive by a fingerprint sensor and Arduino.

Using WiFi to control your Arduino UNO, Nano or Mega as a basis. Includes feedback and simple hardware.

An Arduino Nano used as an IO expander on I2C for ESP8266. For example, add 8 digitals IO and 6 analog inputs.

MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.

Ever wanted to use a newer GoPro camera on your 3DR Solo? Here is how you can connect and control the latest GoPro 5/6/7 camera models.

Making a big digital wall clock using Arduino Mega 2560, 5054 LED strip, DS3231 RTC, IRFZ44N MOSFET transistor, and aluminum profile.

A 16x32 LED matrix displaying an evolving RGB countdown 'til the new year. A surefire way to bring a New Year's Eve party to the next level!

Explore the endless possibilities of the MaxMatrix and create a pong game with it.

This project is simple representation of home automation and can be installed with conventional switchboards too.

Glowing LED to detect the increase in pressure by pressure pad using Arduino.

Color sorter based on Arduino Nano, TCS230/TCS3200 color sensor, step motor with gear, and small 9g servo.

Use a joystick to control a classic drawing toy through two DC motors.

This project will show you how to make a DIY 4-wheel robot that can be controlled using a smartphone via Dabble, a mobile application.

This sample project shows how to build a LoRa connected temperature & humidity sensor (bit-bashed digital)