Inexpensive/disposable wearable two-way communication system for restaurant/grocery/retail workers
Project tutorial by Ish Ot Jr.
Advanced but yet affordable end-to-end medical remote monitoring solution of patient vitals and influence by the indoor air quality.
Project tutorial by Marius Dima
Keep that bad virus away from your safe zone. Build your own real-time thermal vision device to detect unwanted visitors at your door.
As a follow up to the room thermometer project, we write a sketch that communicates with an online weather service and displays the weather.
Project tutorial by BnBe Club
This post will tell you everything you need to know about MQTT communication which will enable you to use it communicate between devices.
Make an EC/pH/ORP/temperature sensor device to monitor water. Interact with it through a website using Bluetooth Low Energy.
Project tutorial by uFire
Control your room lighting system and display weather information via specifically developed Android app and a uniquely designed PCB.
Project tutorial by Kutluhan Aktar
Sentinel was designed to provide a subtle reminder not to touch your face.
Project tutorial by Nick Bild
Use your Arduino Nano or Particle Photon board and build a binary Nixie clock with 18 x IN-2 Nixie tubes.
Project tutorial by Marcin Saj
Otto Diy is a bipedal robot, driven by microcontrollers and controlled by a remote, able to walk and turn around.
Project tutorial by momograma and PonsiDanilo
Otto got arms and LED matrix to look similar to a "Human". Assemble with our Builder Kit H or create your own using the opensource designs.
Project tutorial by Camilo Parra Palacio
Learn how to use Arduino IoT Cloud and Amazon Alexa to switch the channel, adjust the volume and turn on or off any TV.
Project tutorial by 4 developers
Via Arduino Nano 33 IoT and a PHP web application, check whether you have a particular book in your library before purchasing by using ISBN.
Smart glasses with a gentle memory assist.
Get your Nano 33 IoT board connected to full GDB debugging so you can solve those bugs and get your project released!
Project tutorial by arduinocc
Change the ornament color by choosing RGB color patterns. Block it by redirecting and play Jingle Bells via buttons. Share it :)
Or connect with your social account:
New here? Create an account