Easy implementation of Rev-limiter for Automotive or Motorcycle Engine.
Project tutorial by adrianos_botis
We can measure body temperature without contact with this device.
Project tutorial by Akshay Joseph
This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
Project tutorial by HeathenHacks
Fully adjustable via sketch of Arduino NANO | Easy making from ready-made components | Non-mechanical unbreakable sensors | Strong frame
Project tutorial by Steve Massikker
This project demonstrates the integration to build an intelligent system to control home appliances for elderly
Project tutorial by the lonely programmer
See how an Arduino can be transmit music over AM with only a few lines of code.
Project tutorial by Doctor Volt
In this tutorial I am looking at using millis function in the code. Describing the advantages it has over using delay function.
Project tutorial by mdraber
I wondered if the SSD1106 can be used for more than text & simple graphics. After a bit of overclocking I managed to stream video at 30 FPS.
Project tutorial by saadsaif0333
This device serves for accurate measurement of small resistances in the range of 0.1 ohm up to 50 ohms.
Project tutorial by Mirko Pavleski
Arduino TEA5767 radio with analog meters for showing frequency and signal strength.
Ever tried to get out of bed quietly at night only to trip over something and wake up the whole house?
Project tutorial by T3ch Flicks
How to make a LED Spirit Level using Arduino and MPU6050 | LED Spirit Level
Project tutorial by Muhammad Ansar
This project is similar to my previous one but uses the FHT library which turns out to be at least 4 times faster than the FFT.
Project tutorial by janux
This smart lock allows create rules and scheduled actions with your voice using Alexa and a new unlock feature using smartphone fingerprint.
Project tutorial by Robinson Mesino
This is my second line follower robot (Version 4). Unlike the previous one, I have made the design of the printed circuit (Chassis).
Project tutorial by drakerdg
A simple to build clock with many features.
Program 6 ATtiny85/13A at the same time with this custom programmer board.
Project tutorial by Arnov Sharma
Inexpensive, precision, autorange capacitance meter with a large range.
Made a twist on good old Nanoleaf project with WS2812B RGB LEDs and Attiny85!
Contains a linear scale in which the frequency is displayed with an color LED dot which is an integral part of the WS2812 LED strip.
Build an Arduino heart rate monitor with a MAX30102 sensor and a 16x2 LCD.
Convert an Arduino Nano into a retro games console.
Project tutorial by bmcage
This project uses mobile phone to communicate with a robot via bluetooth. It also senses obstacles and stops to avoid collision.
Project tutorial by alokmech007
Are you tired of sticking your arms out to indicate which direction you're turning?
Project tutorial by simonwongwong
Or connect with your social account:
New here? Create an account