I decided to make my own phone that would only be used for making and receiving calls. I hope it will be as durable as the Nokia 3310.
Project in progress by ardutronic
Displays your pulse rate, blood oxygen level and a moving graph of each heart beat, the photoplethysmogram (PPG).
Project in progress by Jeff Magee
Simple device to control and initialize DALI lamps.
Project in progress by NabiyevTR
For use in DIY homebrew radio equipment such superheterodyne single/double conversion receiver, SDR, HAM QRP transceivers or RF generator.
Project in progress by CesarSound
Add sensors in a beehive to follow bees life.
Project in progress by sgoutteb
VFO/RF generator for use in homebrew radio equipment such as direct conversion and superheterodyne receivers or ham transmitters.
A simple 8x32 LED matrix alarm clock.
Project in progress by vikonix
Unlimited MIDI channels, XY plotter, faders, buttons, and settings. Also visual support with OLED display!
Project in progress by yilmazyurdakul
A touchscreen in the wall that allows you to control each and every LED light in your ceiling independently and phone controllable!
Project in progress by Joey Pongallo
This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).
Project in progress by Tim Jackson
8Bit Digital Delay / LO-FI Bitcrusher / Reverse Speech DSP Pedal Effects for Guitar, Voice, Synths, etc.
Make this robot moves by just moving your hand!
Project in progress by abdelkader_ch
In a previous project I developed a GPS data logger for RC aircraft but I did not have feedback on the receiver. So I modified the prototype
Project in progress by yvesmorele
A LED strip development multipurpose module
Project in progress by Anas Mo
A device to translate sign language to speech
Project in progress by Ahmed Ramzi Houalef
Minimalist cars race with a strip of smart LEDs and two switches.This project has evolved and now has its own website: www.openledrace.com
Project in progress by Gerardo Barbarov Rostan
Protect your flying machine!
Project in progress by RoboCircuits
eNVIRO is an advanced weather station with remote sensor.
Project in progress by antiElectron
Touchless door handle mechanism that can be used in every door just replacing the standard handle. Very useful for people with disabilities.
Project in progress by Jaume and Bolito2
3 Oscillators Polyphonic Synth with MIDI using the Arduino Nano.
Build an "invisibe" expression pedal for your guitar with MCP41010 and Arduino Nano. It's awesome and simple. May the funk be with you.
Project in progress by javier muñoz sáez
Arduino-based digital hardware synthesizer modules. Goal was to design something to be cheap and super easy to build. First iteration.
Project in progress by Daniel Sinderson
There are 20 predefined wire sizes to choose from and/or one can also enter in custom sizes including their bobbin size.
Project in progress by Ray Richter
This project adds a "roger beep" function to any Icom amateur radio transceiver equipped with a 13-pin accessory port.
Project in progress by VE2BAP
Or connect with your social account:
New here? Create an account