Diversity Adaptive Obstacle Avoiding Robot

The Materia 101 is the first official Arduino 3D printer. It runs using an Arduino Mega 2560 and a “RAMPS 1.4” shield. Learn the basics.

The mechanism of the project depends on the motion of many wires connected with each other...

This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.

In this article, we're going to build a controller that you can use on Steam!

This robot car follows voice command with the help of mobile for serial communication.

Different PLA filaments have different melting points. In this tutorial, we will find the ideal temperature for a specific PLA filament.

This brick will allow you to include addressable LEDs in your LEGO models.

A LEGO compatible case for the Arduino Micro to be used together with the Arduino based LEGO power function IR-receiver.

This tutorial will enable you to create your own spin on the traditional Magic 8 Ball.

A touch sensor pad with sound sensor controlling AC/ DC lights.

Learn how to perfect the first and most important layer of a print by using the “skirt”-feature.

Make something nice and personal for the holidays with the help of individually addressable RGB LEDs.

This is part of a Lego themed series of tutorials.

Work with Slic3r and the Materia 101 and print a pirate hook.

This time we are going to make the casing for a remote control made with Arduino Micro, IR-sensor and an LED.

What is backlash? What are the causes and symptoms of it? How do we compensate for it?

Printing PLA often requires proper cooling. Improve your Materia 101 fan system with a bigger fan and a fan duct design.

There are many things you can fix around the house with a 3D printer. I’m going to fix the button on our microwave oven in the office.

Tips and tricks for using your Materia.

In this tutorial we show some techniques to avoid warping.

Using a BPI NB-IoT development board together with Arduino.

This project is used to detect the motion of a comatose patient during his treatment. this will be a 24 hours monitoring system.