Design of an indicative featured and speed controlled obstacle avoiding robot.

How To Make a Stepper Motor Speed Controller using Arduino and L298 Motor Driver

In this article, we're going to build a controller that you can use on Steam!

How to make a Car Speed Detector using Arduino and IR Sensor

How to make diffrent patterns for LED Cube 4x4x4 with shift registers

This tutorial will enable you to create your own spin on the traditional Magic 8 Ball.

If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.

How to make Power Saving Automatic Room Light Control using Arduino and Ultrasonic Sensor

How to make Countdown Timer Relay using Arduino and 16x2 LCD Display

How to make Arduino based Home Appliance Control Using Android Application | Home Automation Project

A4 size CNC 2D Plotter using Processing, Arduino, L298 and Stepper Motor | A4 CNC Plotter

Do you want to create your own robot? Then this is your best guide. This is a smart robot controlled by an Android app so easy to build.

How to make RF Remote Control For Home Appliances and How to Decode 315MHz RF Remote

How to make Touch and Android Application Controlled switch board | Bluetooth based Home Automation

Make something nice and personal for the holidays with the help of individually addressable RGB LEDs.

LCD Screens and the Arduino Uno

How to make a LED Spirit Level using Arduino and MPU6050 | LED Spirit Level

This brick will allow you to include addressable LEDs in your LEGO models.

Learn how to perfect the first and most important layer of a print by using the “skirt”-feature.

This is part of a Lego themed series of tutorials.

A LEGO compatible case for the Arduino Micro to be used together with the Arduino based LEGO power function IR-receiver.

This time we are going to make the casing for a remote control made with Arduino Micro, IR-sensor and an LED.

In this tutorial we show some techniques to avoid warping.

There are many things you can fix around the house with a 3D printer. I’m going to fix the button on our microwave oven in the office.