Create a simple home automation system using Arduino and an Android phone.
Project showcase by Davide Vertuani
Do you know the MQTT protocol? Use this with Cayenne. Build your project and use a free cloud platform with Dashboard and many Widgets.
Project tutorial by Giovanni Gentile
Gardening is a very long time taking task every day. In this tutorial, I will show how to make everything automated in an easy way.
Project showcase by flammeur
Sometimes when I take a bath, the water stops. I checked, the water tank is empty and I have to call the water engineer to fix the water.
Project showcase by willy
These are sensors for home safety.
Project showcase by proton029
How to measure the instantaneous power absorbed by the electrical system and send it to a display & sound a buzzer if max power is reached.
Project tutorial by Giuseppe Torino
FlowerDuino (Flower Power by Parrot hack) monitors and analyzes the four parameters essential to your plants health into Cayenne dashboard.
Project showcase by benjamin.notteghem
This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).
Project in progress by Danny Van den Heuvel
Periodically store celsius values of six TMP36 sensors to a csv file on an SD card and show values on LCD.
Project in progress by Dooni
The system monitors the patients based on sensor data and notifies the corresponding doctors/nurses or management in case of emergency.
Project tutorial by Salah Uddin
Gardening is a very long term project taking a little time every day. Why not automate it?
Project tutorial by Thomas sxt
This system monitors places where water could leak and turn the main water valve if any water leakage is detected.
Project tutorial by Philippe Libioulle
Last year I did an awesome Christmas light show at my school using only a few Arduinos and a program called Vixen Lights.
Project showcase by igorgaldeano
You just bought a RGB LED strip kit and you would like to get rid of that cheap hand-held IR remote and to have REAL control.
Here we are going to start our project with RFID-RC522 and Arduino with Ethernet Shield.
by Deligence Technologies
I decided to make one. I want use Arduino UNO with Ethernets shield, and STC-013 sensor. The data are visible on MQTT Dashboard by Cayenne.
In this project we are going to turn on bulb from remote location using web services.
A smart bus shelter project integrated with LCD displays(schedule&details of buses, routes), piezo-electricity and crystals using IoT Tech.
Project in progress by Team Technoid
How to make LAN/Ethernet relay switch using Arduino UNO and ethernet shield ENC28j60.
Give your MeArm robot the basic functionality of a real industrial robot.
by Alessio Villa
An open source interpreter and programming language designed to run on Arduino.
Or connect with your social account:
New here? Create an account