An indoor air quality monitoring system for detecting toxic gases.
Project tutorial by Team East West University
Use a fleet of devices to monitor the soil in an agricultural field or greenhouse, and visualize the data remotely.
Project tutorial by Andrei Florian
The project Arduino and RFID Based Attendance System With GSM is a simple and is used at any place where attendance is taken for maintainin
Project tutorial by sarful
This tutorial shows how to use the Arduino MKR GSM 1400's DTMF feature to have a direct interaction with your phone.
In this tutorial, you'll learn how to connect your Arduino MKR GSM 1400 board securely to Google Cloud Platform (GCP) IoT Core.
Project tutorial by Arduino_Genuino
IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.
Project tutorial by wahltharvey
Get the position of your MKR GSM 1400 on your smartphone through an SMS with a Google Maps link.
Control everything with a SINGLE phone call.
Project tutorial by Arduino_Genuino and FabLab_CastelfrancoVeneto
Drive the relays of the MKR Relay Shield connected to a MKR GSM 1400 with an SMS.
Monitor the world's rivers and lakes through a collaborative cloud allowing you to monitor any body of water with a fleet of devices.
Monitor a battery bank and environmental conditions; send notification if water is detected or batteries are unexpectedly low.
Project in progress by damonlane
Using the MKR GSM 1400 to collect and visualise data from a battery operated IoT sensor over a cellular connection.
Project tutorial by Alexis Susset
Use Arduino CLI tools to code, compile and upload programms to your Arduino Board. Follow this tutorial for getting started with arduino-cli
Project tutorial by Jithin Sanal
Use an Arduino MKR GSM 1400 and a Blynk app to control the two relays of the MKR Relay Proto Shield.
A guide for the Hologram.io Arduino MKR 1400 GSM workshop for IoTDevFest PHX 2019.
Project tutorial by Moheeb Zara and benstr 🚀
Simple enclosure and breadboard to mount Arduino MKR boards in a cabinet for prototyping.
Project showcase by hwhardsoft
A prototype for Smart Cities to enhance Environment Monitoring using MKR GSM1400 and Hologram.
Project tutorial by Muhammad Afzal
Monitor patients sent to self-isolate with the coronavirus by collecting their temperature, heart rate and location with a wristband.
Use some basic hardware and a 3g connection to see if the little man inside your fridge turns your light off when the fridge door closes :)
Project tutorial by smgs
Applying IoT technologies to revive an old SCADA telemetry system.
Project tutorial by Emile Ackbarali
Sending Machine to Machine Commands with a Twilio SIM and an Arduino MKR GSM 1400.
by Christopher Konopka
Control your media player using simple hand gestures. No complex circuit. Works on all computers.
CovidTestDrone enables self-administered COVID-19 tests to be delivered within minutes to patient’s homes via drone delivery.
This is a project based on Arduino MKR GSM 1400 that will send a text notification when it senses rain drops.
Project in progress by Jerico Cruz
Or connect with your social account:
New here? Create an account