Connect a Modbus energy meter to an Arduino and monitor power consumption via Home Assistant.

Group all the information collected by a MKR WiFi 1010 + MKR ENV Shield in a single, web-based dashboard.

Learn how to use Arduino IoT Cloud and Amazon Alexa to interact with your sensors.

Do you want to send message on Discord using an Arduino? It is really easy thanks to webhooks.

In this tutorial, you'll learn how to connect your Arduino MKR WiFi 1010 (or MKR 1000) board securely to AWS IoT Core.

This small project shows the current data of coronavirus outbreak of different countries in realtime on a 2.4 inch TFT.

Octopod, a uniquely shaped full automation system that allows you to monitor your industry and keep security with AI and smart RFID locks.

An amazing off-road robot with 4-wheel drive.

Spectrino - Arduino devices that can be implemented on a wide spectrum of touch-free tinyML based housing and society systems.

In this tutorial we are going to create a smart plug to turn on or off the light of a lamp remotely using Google's voice assistant.

A very basic tutorial on how to interface a microcontroller to an MQTT broker and interact with data on Node-RED.

A touch-free germs disinfecting device that can disinfect anything from masks, wallets to mobile phones, killing maximum germs using UV-C.

This tutorial describes how to use the Omron D6T Thermal Sensor to detect seat occupancy by measuring temperature with the Arduino board.

Use a Nano 33 IoT or a MKR WiFi 1010 to access a TI SensorTag to easily build a powerful BLE data logger.

WiFi access points (Espressif devices) are very cool, but how to connect without checking the IP address via serial? Captive portal.

Interacting with the Arduino and Adafruit IoT Cloud with the MKR WiFi 1010 and the MKR ENV and MKR RGB shields.

Example of the use of a Digital PDM microphone.

If you're trying to learn Ignition and want a source of actual data, this tutorial demonstrates how to feed Ignition with Arduino.

Easily monitorize your garden's environment with simple components.

Arduino MKR RGB displays PurpleAir air quality data for a sensor near you.

Using the Arduino Cloud API to obtain IoT data for your MIT App Inventor apps.

Show status information, change NW credentials, ping your gateway, show sensor values or get more details by activating debugging…

Take readings from the DHT11 Temperature/Humidity sensor and display them on the Arduino IoT Cloud.

An easy and convenient way to measure distance thresholds in public and crowded areas to follow safe social distancing.