Create a digital watch for Arduino combined with a 16x2 LCD Keypad Shield and using YAKINDU Statechart Tools.

How alert and happy Cecile (with Alzheimer's) became when she heard familiar songs! Lift the book, turn the page--the book does the rest.

If you want a device that could measure your heart beat and plot its curve trace on an OLED display, then this will be your best guide.

Control toys like a superhero. A DIY video for how to make gesture-controlled car.

Building an RFIDD access control system.

One port to role them all.

Make your own Arduino coin eater/bank. A DIY Arduino idea.

This is a very simple way to control a 3-phase AC installation in a delta configuration.

Project simulator control and display encoder motor.

6.4A-20nA current/voltage/power monitor based on the TI INA209 with extra GND usable as Arduino shield, FeatherWing, breakout or breadboard.

This is a 4-player reaction game penalizing the loser with a shot of liquor delivered to them on a conveyor.

The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.

But why?

Stream and analyze live data from your Arduino microcontroller into Excel with the Data Streamer add-in!

IoT device to remotely monitor pressure (0-150 psi) using cellular data. Get notifications for pressures above/below high/low set-points.

Gizmo is a surveillance robot that can be remote controlled by smartphone and voice when in hearing distance.

Two-wheel auto gear ENGINE is KILLED (off) when the sensor detects a child accelerate the vehicle or a vehicle falls down to avoid accident.

Like playing tic-tac-toe, just call your Arduino and play.

How to interface an IR sensor with an Arduino Uno.

GUYS TELL YOUR SUPPORT TO ME.This project one of way of smart farming which can be used for analysis of soil.

Unlock each of 16 (4x4) locks to crack the bigger lock by flipping the states either horzontally or vertically.

A solar-powered temperature and humidity monitoring system for compost.

Uno-based battery-powered PM10 / PM2.5 analyzer with bright large digits on an OLED display.

Hi everyone, in this article we're going to make and build a pedal board and a sequential gearbox with Arduino Uno, making it a joystick.