Record and play back a few seconds of input stored in EEPROM.
Project tutorial by millerman4487
Get the speed of your die-cast toy car!
Project showcase by NerdFatherRJ
This project shows how to control a servo motor with a smartphone via Bluetooth.
Project tutorial by JANAK13
Peltier element + water projection machine.
Project showcase by vtol
This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.
Measure the juice left in your AA or AAA batteries anytime using an Arduino Uno and a couple of jumpers.
Project tutorial by AJAY-Negasonic
Interfacing the shield with Arduino UNO board and fixing the touch detection and inversion problem.
Project tutorial by SurtrTech
The DC motor controlling library is provided to control all types of DC motors especially for industrial motion control.
Project tutorial by ambhatt
Allows 4 modes: manual, recording of coordinates, play, and autoplay mode. Uses internal LED diode attached to pin 13 to indicate mode.
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
Using Serial. println(temp) to send real-time temperature to web. Optionally, we can see daily or hourly graph of temperature in real-time.
Project tutorial by IoT_hobbyist
Getting some information from human body by using simple sensors and Arduino.
Project tutorial by ElectroPeak
Reconfigurable structures that enhance occupants' social and physical experiences.
Project showcase by Mostafa Alani, Ph.D
With a Windows tablet, Arduino, and HC-SR04, you can create a graphical caliper to show the distance.
by Philip Ushijima
Android app-controlled, Arduino-based kit that provides simultaneous data about body t°, heart rate, room humidity and t° data.
Project tutorial by Diana Khalipina
Monitor your home remotely via web using Arduino Uno and pan-tilt Grove camera.
DTMF decoder without an 8870.
Project tutorial by MM_Shoaib
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
A short and easy tutorial on how to interface the module with UNO board using simple examples.
This library creates an 8-bit IO port for Arduino by combining any 8 Arduino pins. With this library, one can send/get direct 8-bit data.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Combine Arduino with Bluetooth and relay, and control your AC appliance with a smartphone app.
by Arnov Sharma
Replace all your IR remotes control with an Arduino.
Project tutorial by TATCO
This project uses an ultrasonic distance sensor to create a pocket of wave interference where a small object can be levitated.
Or connect with your social account:
New here? Create an account